Catalogue numbers for GORE® Molding & Occlusion Balloon
GORE® Molding & Occlusion Balloon | ||||
|---|---|---|---|---|
| Catalogue Number | Balloon Inflation Range (mm) | Balloon Length (mm) | Catheter Length (cm) | Wire Compatibility (in) |
| MOB37 | 10-37 | 40 | 90 | 0.035 |
Inflation volume guide | |
|---|---|
| Intended Balloon Diameter (mm) | Recommended Inflation Volume (ml) |
| 10 | 2 |
| 20 | 7 |
| 30 | 16 |
| 37* | 35 |
*Maximum balloon inflation diameter
CAUTION: The above balloon inflation chart volumes and diameters are only an approximate guide. Balloon inflation should only be performed while closely monitoring under fluoroscopy. Do not inflate the balloon to a diameter larger than the vessel it is being inflated within. | |
Refer to Instructions for Use at eifu.goremedical.com for a complete description of all applicable indications, warnings, precautions and contraindications for the markets where this product is available. RXOnly
INDICATIONS FOR USE IN EUROPE: The GORE® Molding and Occlusion Balloon Catheter is intended for temporary occlusion of large diameter vessels or to assist the expansion of self-expanding endovascular prostheses (stent grafts).
CONTRAINDICATIONS: The GORE® Molding and Occlusion Balloon Catheter is contraindicated in patients who:
- are contraindicated to contrast media or anticoagulants
- have an arterial entry site that cannot accommodate a 10 Fr introducer sheath
- are minors
- are pregnant.